|
| So it's showing skips on the iPad, but not the 20/20? If that's the case and you can confirm that it's not skipping, then you may just have an iPad that's too slow or a 20/20 that's maxed out on processing power.
Also, just thought of this but no longer think this is your problem, DigiFarm wants a 38.4 baud at 1 Hz and just the GGA string. When running a 20/20, that's not doable, hence the NAV may be your better option. On Deere, I always ran the 3 strings with a 19.2 baud 5hz. I did occasionally see skips on the iPad, but it never missed a seed and no skips on the 20/20. No particular reason for those settings, other than I've read in the past that's what you should do with a Deere system. Not sure it's what "the pros" suggest, but it worked very well. | |
|
How to change hertz on Gen II 20/20.
