|
Hennepin, IL | Are you getting NMEA strings from the diagnostic port on the NAV, or from the 372 directly? I've always had better luck pulling from the NAV. I doubt changing to 10hz will fix anything, but if you try, make sure baud is set to 38400, not 19200. Those 3 strings at 19200 baud and 10hz will likely overload it. I've had low baud rates cause weird issues in the past so I like 38400 regardless. Another thing to try is to rebuild the maps in the Cab app. Those skips may just be a function of the data transfer between the 2020 and the iPad. | |
|
How to change hertz on Gen II 20/20.
