Posted 5/9/2024 15:57 (#10734707 - in reply to #10734157) Subject: RE: Welding a port in a stainless tank
NE Indiana
Update... Went and got some stainless wire and a tank of 98/2 gas, They didn't have any tri mix but said the 98/2 should be ok. It went pretty well but I wasn't prepared for how much different stainless welds from mild steel. Was a real challenge getting a good bead welding upside down. Got water in the tank now and will let it sit overnight and see if I get any drips.
Welding a port in a stainless tank
