|
NW MN | Won’t mess with autoswath timing. It would mess with positioning on side hills a little bit. We are pool table flat here so that was not a concern for me.
I assume you did your due diligence on this, but make sure your measurements and left/right offsets for your SCM mounting location are correct. What you describe makes me wonder if these are the issue. If the tractor holds a straight line and does fine with line acquisition I doubt it is a WAS issue. The fact that your problem is when the tractor rocks and pitches points towards terrain compensation. If the SCM location is recorded wrong you could certainly see issues.
I plant with a Versatile375 4WD with Z2 and it is dead steady going through our version of waterways. | |
|
Afs Connect/Ag Leader Z2 issues
