|
IL | I'm trying to get my AL 1200 to run my ball valves on the planter. It controls my sprayer with 4 teejet valves just fine, but it won't operate the valves on the planter
These valves are from another toolbar, along with the harness, and were run by a Raven 440 just fine. That cab harness is still in the other tractor
After investigating, I find the valve harness does not have a constant power on pin 16, which it appears the valves call for. That orange wire is on pin 14, which my diagram shows blank( but my supply cable has a pin ) How can it operate the sprayer valves then?
I may try the harness from the other tractor, but it should be identical to this one.
It has me baffled
Edited by west illini 5/4/2024 15:09
| |
|
raven harness wiring question
