Posted 5/4/2024 08:58 (#10728205 - in reply to #10728182) Subject: RE: 4640 Universal and signal from Cygnus/Vector Pro receiver
Cedar Rapids, Iowa
I would start by double checking the cable to make sure the pins are where they should be. Here's the pinout for the Vector Pro: http://lefebure.com/documentation/cnh-vector-pro/
I don't know anything about the pinout for the 4640 though.
We have a Vector Pro sending NMEA data to a Kinze Blue Vantage and it works fine. We're running a baud rate of 115,200 and messages at 10Hz.