Attaching an Image

There are two ways to insert an image in your posts on Ag Talk. This tutorial will lead you step by step through the various ways to insert images. The two ways to insert images are:

1. Using HTML to embed an image already on the WWW into your post
   1. Using the HTML editor (must be a registered user)
   2. Manually embedding images
2. Uploading an image off of your computer onto the Ag Talk server to include the image at the bottom of your post.

Embedding an image into your post using the HTML editor

To use the HTML editing tool to produce a post as pictured above, you have two options.

Option 1: In the upper right corner of the page, click on CONTROL PANEL (you must be registered and logged in to use the Control Panel).

Scroll down to this box and change No to Yes.

Scroll to the bottom of the page and click on

You will now need to click on Forums:

The HTML tools will always appear in the message box when you create a post or reply to a post. They look like this:

 Click on the “tree” shown here in red:

This box will appear:

When you are done typing your post, click .

Manually Embedding an Image in Your Post

Begin with the html code below:
< img src=”
Immediately after the quotation marks, type the address of the photo. (To find the address of a photo from a page on the internet, right click on the picture and click on properties.)
http://www.agri-links.com/eagle.jpg
Finish with the code:
“>
The completed code will look like this: 
<img src=http://www.agri-links.com/eagle.jpg>

Uploading an Attachment from Your Computer

1. Type your post as you want it.
2. Check the box next to
3. Click
4. Click the

5. Find the picture you want to attach on your computer. Click

6. Click

7. If you desire to add additional pictures, repeat steps 4 through 6.
8. When you are ready to make your post, click